REPLACING HARD DRIVE WINDOWS 8 PRO
REPLACING HARD DRIVE WINDOWS 8 SOFTWARE
REPLACING HARD DRIVE WINDOWS 8 PC

REPLACING HARD DRIVE WINDOWS 8 PRO

The Pro version of Backupper allows you to do this during the clone process, but there's no need to pay-another AOMEI tool called Partition Assistant can do it for free.

The Windows volume you copied to your SSD will be the same size as it was on the original hard drive, and you'll need to expand it so it takes up the rest of the disk. If, however, you upgraded to an SSD with more space than your old drive, you'll need to do one more thing. If your SSD is the same size or smaller than your old hard drive, you should be all done with the cloning process, and you can skip to the next step. If everything looks good, you're ready to rock, and your computer should feel significantly snappier without having to reinstall a thing. Open File Explorer and check to confirm that your SSD is, in fact, the C: drive. Your computer will reboot, and if all went well, it should plop you back into Windows faster than ever before. Choose your SSD from the list as the first boot drive, then head back to the BIOS' main menu to exit, saving your settings. These will be in a different spot depending on your computer, but once you find them, you'll want to select the option to change the boot sequence. (This may not be necessary on laptops with just one drive, but if you experience problems booting, it can help on some PCs.) Turn your computer on and enter its BIOS/UEFI setup-this is a bit different on every PC, but it'll usually say something like 'Press DEL to enter setup' on the boot screen, so you'll want to press the corresponding key as it starts up.ДЇrom there, look for your BIOS' boot options. Once you're finished installing the SSD, you'll need to tell your computer to boot from it. Close Disk Management and continue to the next step. It isn't super important what this volume looks like we just need a volume on the disk for AOMEI to see it. Right-click on it, choose New Simple Volume, and click Next through the wizard to create a new volume taking up the entire drive. Once the drive has been initialized, you should see the drive show up in the bottom pane of Disk Management as unallocated space. If you aren't prompted to initialize the drive, and don't see it in Disk Management, double-check that it's properly connected to your computer, and that the enclosure or dock is powered on (if necessary).

REPLACING HARD DRIVE WINDOWS 8 PC

If you aren't sure, look up your specific model of PC or motherboard to see which type of firmware it uses. If you have an older PC with a traditional BIOS, you may need to use an MBR partition table. I'll be using GPT for my SSD, since I have a modern PC with a UEFI firmware. It'll prompt you to initialize the drive using either the GPT or MBR partition table. Click the 'Create and format hard disk partitions' option, and Disk Management will open. Open the Start menu and type 'partitions' in the search box. If it's a brand-new drive, you probably won't see the drive pop up in File Explorer, but don't worry it just needs to be initialized first. Plug your SSD into the SATA-to-USB adapter, then plug that into your computer.

REPLACING HARD DRIVE WINDOWS 8 SOFTWARE

Best Malware Removal and Protection Software.

Replacing hard drive windows 8